AirGizmos Horizontal Tilt Bracket angles the GPS at a fixed angle of 15 degrees, providing a much more convenient viewing angle.
This adapter fits in the same panel cutout as the Panel Dock, so if you already have a Panel Dock you can attach this adapter without having to modify your installation.You can mount the Angle Adapter in either direction, in case you fly in the right seat.
In addition, by using this adapter you can expand your installation options, since it lets you surface-mount the Panel Dock on any instrument panel.
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
Can now see screen much better, very easy install
Nice mount. Can be attached flush on the panel.
Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
This needs to be used in conjunction with the panel dock. You can use it with either part # 11-08321 or part # 11-03509.
Yes, but you will also need 11-03509 to dock the 296 into. This adapter tilts the dock that holds the GPS.
Yes, this angle adapter will work with the Garmin 660 Airgizmos Panel Mount, part # 11-14552.
Yes, see part # 11-07310.
This adapter fits in the same panel cutout as the Panel Dock, so if you already have a Panel Dock you can attach this adapter without having to modify your installation. You can mount the Angle Adapter in either direction.
No, the recommended install requires a panel cut.