|JPI EDM 960 4C TWIN|
|JPI EDM 960 4C TWIN 4 TANK SYS|
|JPI EDM 960 4C NO TANKS|
|JPI EDM 960 6C TWIN|
|JPI EDM 960 6C TWIN 4 TANK SYS|
|JPI EDM 960 6C NO TANKS|
|JPI EDM 960 7C TWIN|
|JPI EDM 960 8C TWIN|
|JPI EDM 960 9C TWIN|
there WILL be a $200 fee: Required Order Form
Think of your EDM-960 Twin as your personal flight engineer. Always there, working in the background, constantly watching over your engine while you concentrate on flying the aircraft. Your EDM-960 will be monitoring your engine conditions four times per second and will warn you instantly if any measurement exceeds the programmed limit.
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The Piper Aztec PA-23-250 is on the approved model list and is STC'd for use with the JPI EDM-960.
The unit is 4.69"H X 5.58"W X 2.76"D.
Yes, this will include all the probes for the features it has. Please be sure to fill out the required order form.
JPI asks for the type of fuel level senders in the required order form to make sure they match. The EDM is a flush mount unit.
Nothing additional needed, you would reuse all the senders from the 760.