3/4” Capacitive Fuel Level Probe for the MVP-50P System Monitor.
Specify length of the probe before you order.
P-300C is assembled from a 3/4" Aluminum pipe with an Aluminum center electrode and a 3/4" NPT boss attached to one end. The electronics (P-300C Interface Module) are located externally from the probe. The probe was designed to fit in a 3/4" NPT.
Coupler and Guides, included with probe, are intended to be molded into a fiberglass fuel tank.
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
You will be asked to specify the length you require once the item is in the shopping cart. It is custom made to your length.
Per the manufacturer, the operating temperatures for this probe are -55C to 70C. the short high temperature is 100C and the short low temperature is -65C