REGIONAL WAREHOUSE NETWORK FOR RAPID DELIVERY | 877-288-8077

GLARESHIELD CESSNA 182 - STC

$544.00/Each
Part# 05-03878
MFR Model# 182

Overview

Aircraft Type: Cessna 185
Fits Models:185 through E, F Models Prior to 1974
Part: #182

Click here for more information

Note: STC is pending for use on US type certificated aircraft.

This part can be manufactured under contract with the owner operator under FAR 21.303b2. It is the owner operator's responsibility to determine airworthiness and applicability.
   
California Prop 65 Warning Symbol

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Reviews

Did not fit for our Cessna 180H. Was too small, and left large gaps on the sides and at the top of the instrument panel.

Keaton
July 12, 2021

Q&A

Please note, Pilotshop.com's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop.com assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: Are the light under the glareshield LED? Also, are they dimmable?

Per supplier: This light is produced with incandescent bulbs, not LED's. Yes, the light is dimmable.

Q: Is the lighting able to be dimmed by something like a MaxDim 9100-001-D?

Yes, the lights can be dimmed by the MaxDim.

Q: What color are the 12v lights - are the lights dimmable if connected to a rheostat switch?

The lights are white colored and they can be dimmed.

Q: Can this glareshield be installed without removing the windshield?

Yes, you may need to trim and gently bend the glareshield to install but you would not need to remove the windshield.

Q: Is the glareshield only, smooth on the bottom side or are they cut out for the incandescent bulbs?

There are not cut outs for the bulbs. The glareshields use a light strip that has adhesive on one side.