|3/8" NPT||1-13/16"||0.39 lbs||05-23330|
|Forged brass 90º throw fuel valves with Fluoroelastomer seals. Available in 1/4", 3/8", or 1/2" female NPT. Light operating force makes them ideal for remote operation. Not FAA approved.|
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
Item worked very well.
MINI FUEL VALVE 3/8"
This valve appears to be very well made. It has an extra feature not mentioned on the website. There is the ability to preset the opening to a selected angle from 0 degrees thru 90 degrees. This feature can also be removed easily if desired.
Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The manufacturer does not have any documentation for use with av gas, however, there are many Aircraft Spruce customers that use these in experimental aircraft with av gas.
Approximately 0.40 lbs each.
This fuel valve will have 3/8" NPT threads.
The ball is made of brass and the seals are made of Fluoroelastomer.
It is NPT.
The only difference is the size of the female fittings, either 1/4 or 3/8 NPT. The ID on the ball is 3/8.