Dynon Skyview VHF COM Radio Sv-Com-X83 - Experimental Only

Select Version:
Horizontal Vertical
Add to Wishlist


By integrating deeply with your Dynon SkyView system, the SkyView COM Radio tunes frequencies by airport and station type - rather than by spinning in a number - at the touch of a button. You can also send frequencies over from the SkyView map airport info pages. For when you're feeling nostalgic (or are following ATC instructions), a dual concentric knob lets you spin in frequencies "the old fashioned way." SkyView will identify the airport and station type as you tune to help ensure you're talking to the right radio station. The SV-COM-X83 adds 8.33 kHz channel spacing.
California Prop 65 Warning Symbol

WARNING: Cancer and Reproductive Harm -


  • Tune frequencies by airport and station type at the touch of a button
  • Send frequencies directly from SkyView
  • GPS-based reverse lookup of airport and station type for manually entered frequencies
  • Vertical and horizontal versions
  • Monitor your standby frequency with dual watch
  • Fully backlit, auto-dimming controls
  • One-touch flip-flop with remote trigger ability
  • Transmit indicator
  • Receive indicator with active/standby differentiation
  • Stuck mic indicator with transmit time-out


  • Frequencies: SV-COM-X83: 118.000 MHz to 136.992 MHz, 8.33 kHz Spacing
  • Control Panels Dimensions: 3.53" (89.7mm) x 1.80" (45.7mm) x 1.27" (32.4mm), available in vertical and horizontal versions
  • Transceiver Module Dimensions: 6.3 (160mm)L x 2.5 (66mm)W x 1.9 (48mm)H
  • Weights: SV-COM-PANEL Control Panel: 5.6 oz (159 g) / SV-COM-X83 Transceiver Module: 0.77lbs (350 g)
  • Power Input: 10-30 VDC
  • Transmit Power: 6 Watts
  • Antenna Connection: TNC
  • TSO'D: Yes
  • Type of Aircraft: Experimental Only


Don't Miss a Thing:
  • Dual watch allows you to listen for transmissions on both your active and standby frequencies simultaneously, with the active taking priority at all times. Use dual watch to monitor an alternate frequency in busy airspace or listen to ATIS without missing anything on the active.
Designed for Your Panel:
  • The SV-COM-X83 are available in both horizontal and vertical versions so that you can craft your perfect panel. And, because the Transceiver module is mounted remotely, the control panel is only 1.27 deep.
  • Frequently Purchased With
  • Customers Also Viewed



Please note,'s personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: Regarding the DYNON SKYVIEW HORIZONTAL VHF COM RADIO SV-COM-X83/V: What is the Watt output? What are the dimensions and what does it weigh?

The transmit wattage is 6W. We have uploaded specs to the 'Documents' tab for specific measurements.

Q: Is the Dynon SV Com C25 TSOed and can it be used a primary comms in certified type aircraft?

No, the Dynon Skyview Com system is intended for use in experimental aircraft only.

Q: Do you have this Dynon Skyview for experimental aircraft?

The Dynon Skyview system and its components are ONLY intended for use in experimental aircraft.

Q: Does the Dynon SV COM have stand-alone capability?

No, this Dynon com is intended for installation into a Dynon Skyview system.

Q: Does this package come with any wiring/connectors included to connect the remote head to the unit and the unit to the Skyview HDX display?

No SkyView network cables must be purchased separately. They are available in different lengths.