Note: for use with the Dynon Skyview system only.
Dynonís dual band ADS-B receiver receives weather & traffic on both 978 MHz and 1090 MHz frequencies.
The dual band SV-ADSB-472 receives ADS-B traffic via 978 MHz (UAT) and 1090 MHz. In the US, it also receives free text and graphical weather from the FAAís network of ADS-B ground stations. Unlike portable ADS-B receivers, you get FULL ADS-B and radar traffic when you pair this with our Mode-S transponder. The remote mounted receiver utilizes an externally mounted antenna for superior ADS-B reception.
The ADS-B antenna must be installed at least two-feet from the transponder antenna.
ADS-B Weather: Subscription-free weather displayed on SkyView, including NEXRAD radar, METARs and TAFS. Airport weather data can be displayed for nearest airports or for a specific airport identifier.
TFR Information: TFR NOTAMs are displayed graphically on the navigation map.
Antenna Information: The SV-ADSB-472 requires its own antenna; it cannot share the transponder's antenna. A UAT-specific antenna or a transponder antenna may be used with the SV-ADSB-472.
Please note any ADS-B unit will operate within the USA only when in clear line of sight of an ADS-B tower (flying at a higher altitudes may be required to gain proper signal).
For more information please visit:FAA Link
I have not installed it yet but I have bought Dynon b3fore and have been pleased.
Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Dynon recommend the AV-74 our part number 11-05846.
The SV-ADSB-472 is a drop-in replacement for the SV-ADSB-470, with identical wiring. Note that the SV-ADSB-472 is smaller, has different mounting dimensions, and the connectors are located differently than they are on the SV-ADSB-470.
You make a selection in the dropdown box on this web page. Once you make the selection for which model you want, the Add to Cart button will appear.
No, this is intended for use with the Dynon SkyView system only.
No, this is intended for use with the Dynon Skyview system only.
No, this is meant to be connected to the Skyview system for ADS-B IN. It is separate from the KT74 and does not require to be connected to your transponder.