|PROBE-NUT NUT FOR TEMP. PROBE||11-09416|
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
Excellent quality and affordable substitute for Garmin GAD 59 and works with Garmin G5.
Easy to install and plenty of lead wires.
Have not used it yet, but looks good.
Good quality. long probe
Much cheaper than Garmin equivalent and also approved for GAD 13 installations. Works perfectly.
havent used it yet just installed
Service is great as always. However, probe came with nut so don’t need it. Picture of probe does not show nut which is why I ordered it.
Part number 11-04603 DAVTRON TEMPERATURE PROBE 12FT. WHITE (ANALOG) is the correct probe required for the Aerovonics AV-20 instrument. Part arrived fast from Spruce East in factory packaging.
Reading from this probe matched reading from another system within one degree. It was not clear that probe D307PS included a probe nut
Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Per Davtron, this an analog AD590 it is current drawing not resistive.
Yes , This probe measures temperature range from -55 c to +125 c (-67 F to +257 F) .
The positive wire would have to go in the IN position.
Per the manufacturer, you are able to shorten the length without affecting calibration.
Yes those are included.
Per manufacturer,"The ch93 supports two different types of temperature probes; rtd and current sense devices". Being that this probe is current sensing, it should be compatible.