|Designed to hold two or more work pieces together where no holes exist. Clamping force is applied at edge of work. Spring loaded, plier actuated. The lack of a takeup screw makes it impossible to over-tighten and damage the work surfaces or the clamp. There are 4 standard sizes : 1/2 x 1/2", 1/2 x 1", 3/4 x 1/2" , 3/4 x 1".|
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
Speedy Delivery! Great product!
ECON SIDE GRIP CLAMPS 3/4 X 1
Best clamps ever! Firmly clamps and holds pieces for drilling or trial fitting.
Thanks to Jim Irwin and company for the this quality item. In the midst of a ground up renovation of a ‘73 Datsun 240Z requiring sheet metal replacement. The unobtrusive profile of these side grip clamps will have the vice clamps parked on the sidelines for some innings!
good quality, and price will come in handy
As per expected! High compression coil
No problems encountered
Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The first dim is the thickness of material the unit will clamp and second is the length of the clamping arms to clamp the material.
The use a standard Cleco plier. Part numbers 12-01480, 12-03807, 12-10105, or 12-03756 will all work.