FORK END MS20667-2

Part# MS20667-2
MFR Model# MS20667-2


The MS20667 Fork End Fittings are manufactured from stainless steel in accordance with the requirements of MIL-DTL-781 and are certified to those standards.
California Prop 65 Warning Symbol

WARNING: Cancer and Reproductive Harm -


Lynann B Verified Purchase

FORK END MS20667-2

March 2, 2023

Lynann B Verified Purchase

FORK END MS20667-2

February 7, 2023

Nice product, quick delivery

Jeremy B
February 21, 2020

All parts received.

Gary M
July 26, 2019

The fork ends were as expected and arrived quickly.

Henry B
May 31, 2019


Please note,'s personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: Are these swaged onto the cable? Do you carry the fork ends that connect to a cable end by applying compression via a tightening nut? These fork ends are also adjustable in length.

Yes, these are swaged onto the cable. We do not having a part that has a fork end to the connect a cable to it by applying pressure.

Q: What is the distance from hole center to the back of the yoke part # MS20667-5?

3/4 inch.

Q: Are these 316 stainless or 304 stainless?

The MS20667 fittings are all 304 type stainless steel.

Q: Do you sell a hand-operated swaging tool to install this part onto the cable?

Per manufacturer: "The only tool that can swage the MS20667-2 fittings is a roll process swage like our M1 tool with a 3/16 die set." This will be part # 12-01188.