PMA6000B Audio Panel w/4-place mono intercom available with or without marker beacon receiver.
I had a new 6000B w/marker beacon receiver installed in my P172D last May--couldn't justify the additional features of the more sophisticated PSE models. What a superb upgrade (previous was a used KA24 King)! The intercom function is much better than my old separate intercom--breaks the squelch easier, without the squelch breaking because of engine noise, making communication with passengers much easier. Being able to shut off the passengers is great, while they can still talk to one another. I had a pair of music jacks installed, one for the front seat and one for the back seat--this allows the back seaters to have their own music, if they wish. I plug in a portable XM radio, so that makes long solo cross countries much more pleasant, and with the automatic mute function, the music instantly shuts off so as not to block ATC calls.
Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
No antenna is included with any PS Eng audio panel as different aircraft will need different types of antennas. You can look at the marker beacon antennas we sell under our antenna section.
The PS Engineering PMA6000B Audio Panel is FAA TSO'D and can be used in Certified Aircraft.
Yes, this comes with everything included for a new install.
No, the PMA6000B is not Bluetooth enabled.
No, the wiring harness is separate from the cost of the unit.
Per the manufacturer, you will not be able to slide in a PAR 200 as it is only a slide in for the 8000 series. It would be a new install.
Yes it is a slide in replacement and it has a two year warranty though PS engineering.
No you will need the PMA7000B PART # 11-01635.