The Pro Pilot is a two axis autopilot designed for precise navigation and altitude control. It encompasses all of the performance and safety features of our other systems, and makes them available in a single, panel mounted instrument.
Fuel Management and Auto Trim, included in price.
For Experimental and LSA Aircraft Only.
The system includes back-lighted buttons and illuminated faceplate nomenclature as part of a pleasing new industrial design. The Pro Pilot provides excellent horizontal navigation capabilities and the vertical navigation provides altitude control, climb/descent functions with airspeed limiting, and altitude pre-select. Climb/descent on airspeed is also included. The Pro Pilot uses Trio's proven "intelligent" Gold Standard servos to assure safe and reliable control actuation. While the Pro Pilot incorporates many features, it is very simple to operate. Just press the H NAV button and it will track your flight plan. Press the V NAV button and it will hold your current altitude. Separate MODE buttons are provided for advanced Horizontal and Vertical functions. The H MODE button allows the pilot to track a GPS flight plan, fly a specific course over the ground, or intercept a flight plan. The V MODE button may be used to specify a minor altitude adjustment, a climb/descent rate, and/or a destination altitude.
Click here to download the Pro Pilot Autopilot brochure in PDF.
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
Had my Trio Pro pilot Autopilot installed about a year ago in my C182, coupled to Garmin 430W GPS. Works as advertised. Very happy.
It looks like a good product. STC Group won’t answer questions or return calls. I called 3times with message, no call back. Sad to see companies fail due to customer service.
It seems to be a great product but customer support is zero. A product this complex without support is a very expensive paperweight. I have tried three times to get installation questions answered and have yet to get one reply. As great a product as this seems to be, I would suggest choosing another company who supports their products.
Two months ago I upgraded my R182RGs autopilot from a 1990s S-Tec 50 that was acting up. The V-Nav function works, but the H-Nav does not. My airplane has been in & out of the shop 6 times for gain adjustments, but it still wont track to my GTN750. First it rolled left. Adjust gain. Then it rolled right. Adjust gain. Then it wandered back & forth, 20 degrees L, 20 degrees R. Adjust gain. Now it rolls 30 degrees R (I let it go and finally turned it off after a 360 degree R turn. Once the shop removed a small broken white plastic gear. This is really frustrating and Im about to seek a return to Trio...
Please note, Pilotshop's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Pilotshop assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
In the box is control head, two servos, connector kits and servo mounting (for RV aircraft only). Harness not included but can be bought separately. Make sure you put your aircraft make and model on your order.
Per the manufacturer, the Trio Pro Pilot does come with the pitch bracket. The roll bracket for an RV 7 is not included and cost an extra 45 dollars.
Per the manufacturer, The servo crank arm is not mounted to the servo when shipped so it can be installed in any orientation, in 45 degree increments.
For attitude information you would need to interface a portable or panel mount aviation GPS.
The Trio autopilot, which is a non certified autopilot is not designed to interface with any certified autopilot system such as the NSD-360.
Yes, the Pro Pilot is compatible with the Garmin Aera 500 and 700 series GPS. You will need the Aera power/data cable to connect with your auto pilot.
Yes. There is a display on the autopilot that does show a turn coordinator. It is available to the pilot at all times, when the autopilot is turned on (engaged or not).
Yes via the 496 power data cable part number 11-02694.
You will need the GPSS/GPSV to capture vertical glide slope for instrument approaches.
As of right now, the Trio is not on the approved autopilot list, and therefore we cannot confirm that it will work.