|Switch, Black, Micromini, Pushbutton, SPST, Off-Mom, PC Terminal, Normally open|
Seems to work well. Handled the heat of soldering just fine. Would prefer a star or lock washer under the nut to address vibration induced failure.
A good switch, but keep in mind it is really subminiture small.
The switch is probably ok, but I cannot use it because of its small size. The descriptions on you web site were not helpful in selecting a proper replacement switch. I ended up ordering another switch from another supplier.
Far too small for replacing the PTT switch on my PA28. Even if it worked, the switch itself is so small I think it would dig into my finger and quickly become uncomfortable to use.
For part number 11-01899 the body of the switch is 1/4" wide, the height of the PTT with button is 5/8" and 1/2" without button and the hole size for the PTT is 5/32".
Yes, the nut is included.
Thank you for updating us, we have fixed our Q+A
Yes this switch button can be used on 12 volt and 24 volt systems.
Please see the Drawing tab for measurements of the switch.
No, it does not.
The data sheet calls for a 8-40 nut.